Resetting a Wavlink extender may frequently fix problems when it comes to malfunctioning devices. Locate the router's reset button first; it's usually on the bottom or rear. To reset the device, use a paperclip or other tiny, sharp item to push and hold the button for 10 to 15 seconds. Note that doing so will erase all custom configurations and return the extender to its factory default settings. The extender will reboot when the reset is finished, and you will need to adjust your network settings again. Make sure that every cable, including the Ethernet wire coming from your modem, is plugged in correctly. After completing these Wavlink wifi extender setup (https://wifiwavlink.net/wavlink-extender-setup/) instructions, test if the router is now operating correctly. Should issues continue, see the extender's handbook or get in touch with Wavlink customer service for more help. One simple way to address connectivity problems and get maximum performance back is to reset the extender.